GA810-050BX
Our angle grinder with angle gear - for the scrubbing and leveling of cast-iron parts, steel parts, welding seams, non-ferrous metals of all types and rock, as well as for any other fabrication areas, such as the steel construction and container construction, for machine building, in foundries and concrete construction.
- For grinding or when used with cut-off wheels of type 27, 41/42, for the best-possible grinding results even on hard-to-reach areas
- Integrated ABU (auto-balancing-unit) reduces vibration and allows a fatique-free operation
- The integrated speed regulator holds the speed of the tool constant, even when tool is operated at full load. Low air consumption.
Objednací číslo
6061139A
| Max. power output | 500 W / .67 hp |
|---|---|
| Speed (no load) | 15300 min-1 |
| Weight | 1,3 kg / 2.87 lbs |
| Drive | vane motor |
| Assortment | Additional Assortment |
| Start | safety lever |
| Design | Basic Design |
| Rotation | right |
| Air consumption (no load) | 0,4 m3/min / 14.12 cfm |
| Air consumption (loaded) | 0,9 m3/min / 31.78 cfm |
| Max. radial speed | 80 m/s / 262.5 ft/s |
| I.D. of air inlet hose | 10 mm / .39 in |
| I.D. of grinding wheel | 16 mm / .63 in |
| O.D. of grinding wheel | 100 mm / 4 in |
| Max. thickness of grinding wheel | 6 mm / .24 in |
| Max. cutting depth | 30 mm / 1.18 in |
| Spindle thread | M14 |
| Length of supply/exhaust hose | 2/1 m / 6.6/3.3 ft |
| Air connection | Nipple |
| Operating pressure | 6,3 bar / 90 psi |
Standard Equipment
| Allen key 3 mm |
|
800446 |
|---|---|---|
| Wrench |
|
6018988 |
| Wrench |
|
828832B |
| Nipple |
|
315071 |
Optional Accessories
| Oil set, oil-25 ml |
|
6078678 |
|---|