GDS 070-153W1YI
Our pneumatic die grinder is designed for the grinding, mainly for the treatment of plastic and metals in foundries, in the entire mechanical engineering industry, the tool industry, in the die industry, the appliance-industry to level, de-burr or treat cast-iron parts.
Cold-insolated housing.
The integrated, reaction-fast speed regulator, which keeps the speed steady under load, allows for an optimal metal cutting.
The grinder that features an extended spindle is ideal for the cleaning of pipes and the grinding in hard-to reach areas. Please Note: When using this grinder for pipe-cleaning, attach lamellar sanding discs or wire brushes only!
The modular construction of this grinder allows to extend the spindle from 400 mm (Model W.I) to 1200 mm (Model W4.I). 1, 2, 3, 4 - number of linked extensions. Adapter extension length of this grinder is 600 mm.
| Max. power output | 700 W / .94 hp |
|---|---|
| Speed (no load) | 15300 min-1 |
| Weight | 2,8 kg / 6.17 lbs |
| Drive | vane motor |
| Assortment | Additional Assortment |
| Start | twist valve |
| Design | Extension design |
| Rotation | right |
| Air consumption (no load) | 0,5 m3/min / 17.66 cfm |
| Air consumption (loaded) | 0,7 m3/min / 24.72 cfm |
| I.D. of air inlet hose | 10 mm / .39 in |
| Weight (air connection) | 0,4 kg / .88 lbs |
| Max. Ø of flap wheel | 50 mm / 1.97 in |
| Max. Ø of brush wheel | 50 mm / 1.97 in |
| Length of supply/exhaust hose | 2/1 m / 6.6/3.3 ft |
| Collets - clamping range | 6 [8; 9; 3/16''; 5/16''; 1/4''] mm |
| Air connection | Nipple |
| Operating pressure | 6,3 bar / 90 psi |
| Collet ø 6 mm |
|
315018 |
|---|---|---|
| Spanner 15 mm |
|
800409 |
| Spanner 22 mm |
|
800416 |
| Nipple |
|
315071 |
| Collet ø 8 mm |
|
315073 |
|---|---|---|
| Collet ø 9 mm |
|
315089 |
| Collet ø 1/4'' |
|
315074 |
| Collet ø 3/16'' |
|
315088 |
| Collet ø 5/16'' |
|
315090 |